4’x6’x6’3.5” Valley Storm Shelter for 8 People

Original price was: $7,000.00.Current price is: $6,250.00.

Valley Storm Shelters™ is a leading designer and manufacturer of above-ground storm shelters and safe rooms. Producer Member of the American Tornado Shelter Association. Price of shelter only, add shipping and or installation, fee to be discussed with your sales rep.

Only one unit available.

This unit is pre-owned but in excellent condition.

Price of shelter only, add shipping and / or installation. Fee to be discussed with your sales rep.

Financing available.


  • 3 in 1: Storm shelter, panic room, and safe vault
  • Rated for EF5 tornadoes, 250 MPH winds

Technical Specification

  • Outside dimensions: 4’W x 6’ L x 6’3.5” H
  • Door location: on the short side, right hinges, open inwards. (4’RHI)
  • Capacity: up to 8 people at 3 SF per person
  • Door Opening: 26.5 inches
  • Construction includes 1/4” steel plate for walls, floor, and door, reinforced 3/4” steel corners, 4” structural C channel, and a full steel 1/4” floor.
  • Steel floor enhances structural support and prevents electrocution
  • Exterior coated with one coat of primer and two coats of high-quality industrial paint (light gray)
  • Three large vents strategically located for natural airflow, covered with 1/4″ steel debris protectors
  • Electrical access opening protected with a weather-resistant grommet
  • 310 lb. vault-like door constructed of 1/4″ plate steel with 4″ C channel reinforcement
  • Door opens inside to prevent entrapment and equipped with a Medeco pick-proof and drill-proof deadbolt
  • Three 1 1/4″ stainless steel locking pins secure the door through six solid steel guide blocks and three solid steel receiver blocks
  • Three heavy-duty barrel hinges with grease fittings ensure easy door operation
  • 1″ diameter laminated polycarbonate bullet-resistant peephole (1 1/4″ thick) for visual inspection
  • Standard anchors included for, 4″, 3,000 PSI concrete slab: 13, 3/4″ D x 4 3/4″ L HILTI expansion bolts, one every 12″. The combined tension load (pull-up force) is over 80,000 lb and over 173,00 lb of shear (horizontal force)
  • Weight: 2470 lb.